Top 9 Tripod Jack Stand – Engine Hoists & Stands

As an Amazon Associate I earn from qualifying purchases.

1. Stark USA

#ad

Red, Stark Underhoist Tripod Stand 2 Ton Capacity High Lift Jack Stand Reach Under Hoist Stand High-Position Lift Range

#ad
Stark USA #ad - Right height for your job - with a 48-3/4in. The all-thread screw rod allows you to make the fine adjustments you need to obtain the perfect working height. But this 2-ton capacity stand provides the muscle and dependability expected from an extra point of support. And the large saddle design cradles the work-piece, allowing the stand to be properly positioned underneath the load.

A large 24in. Built with the best components - from the highest grades of rugged steel to the long lasting, and every part in between, corrosion-resistant lead-free paint finish, use quality components built to exacting standards to deliver top performance and reliability. Extra support - engine parts are extremely heavy and working on a freely supported engine is quite dangerous without the correct precautions. It also excels in situations where a combination of sleek design and superior strength is desirable.

Easy up, even toting a load - the handle of the stand incorporates a thrust bearing that makes it easy to turn, even under the extreme pressures of a heavy load. Lift range, this hoist stand achieves the heights you need to easily get underneath a part or hold it up and out of the way. Use it day in and day out - the high-position hoist stand is the perfect choice for everyday vertical lifting and support in automotive and repair shops. To 84in. X 24in.
BrandStark USA #ad
ManufacturerStark USA #ad
Height48.5 Inches
Length24 Inches
Weight35.27 Pounds
Width24 Inches
Part Number58051

2. Toolsempire

#ad

Toolsempire Underhoist Tripod Stand 2 Ton High Lift Jack Stand Reach Under Hoist Stand

#ad
Toolsempire #ad - Height adjustableadjusted from 49'' to 84'', min. Height: 1250mm, Max. Height: 2128mm. Ideal for supporting exhaust systems, shock absorbers and other vehicle components during under vehicle repair.

Safe and stableheavy duty welded steel construction, a large 24'' x 24'' tripod base adds load stability from the ground up. And the handle of the stand incorporates a thrust bearing that makes it easy to turn, even under the extreme pressures of a heavy load. And the large saddle design cradles the work-piece, allowing the stand to be properly positioned underneath the load.

Multi-applicationthis high-position jack stand is the perfect choice for everyday vertical lifting and support in automotive and repair shops. Easy to operaterotary handle bears any weight easily while you adjust the height as necessary; makes it easy to replace vehicle components. 2 ton bearing-capacitythis high jack stands is made of heavy duty no. 235 steel.
BrandToolsempire #ad
ManufacturerToolsempire #ad
Part NumberAT4768-202009

3. Esco

#ad

Silver, ESCO 10498 Jack Stand, 3 Ton Capacity

#ad
Esco #ad - 6, 000 lb. Anodized post with rubber lifting pad. X 12 in. Minimum height 13. 2 in. Stand is powder coated to prevent rusting and corrosion. Maximum height is 21. 5 in. Base dimensions 12 in. Capacity per stand. 3 ton capacity per stand. 10 adjustable height positions. Sold individually.
BrandEsco #ad
ManufacturerESCO #ad
Height0 Inches
Length0 Inches
Weight11 Pounds
Width0 Inches
Part Number10498
Model10498
Warranty1 year

4. Toolsempire

#ad

Toolsempire Underhoist Tripod Stand 2 Ton High Lift Jack Stand Reach Under Hoist Stand, Heavy Duty Steel Underhoist Support Lift Jack Stand

#ad
Toolsempire #ad - Easy to operaterotary handle bears any weight easily while you adjust the height as necessary; makes it easy to replace vehicle components. Ideal for supporting exhaust systems, shock absorbers and other vehicle components during under vehicle repair.

Safe and stableheavy duty welded steel construction, a large 24'' x 24'' tripod base adds load stability from the ground up. And the large saddle design cradles the work-piece, allowing the stand to be properly positioned underneath the load. And the handle of the stand incorporates a thrust bearing that makes it easy to turn, even under the extreme pressures of a heavy load.

Multi-applicationthis high-position jack stand is the perfect choice for everyday vertical lifting and support in automotive and repair shops. 2 ton bearing-capacitythis high jack stands is made of heavy duty no. 235 steel. Height adjustableadjusted from 49'' to 84'', min. Height: 1250mm, Max. Height: 2128mm.
BrandToolsempire #ad
ManufacturerToolsempire #ad
Weight34.2 Pounds
Part NumberAT4768-202008

5. TCE

#ad

Blue, TCE TCE42009 Torin Steel Tripod Under Hoist Jack Stand: 2 Ton 4,000 lb Capacity

#ad
TCE #ad - Acme all thread rod adjustment for varied load heights. For heavy duty jobs that need maximum height adjustment. Large bases for extra stability. Handles have thrust bearings to turn easily under loads. Featuring heavy-duty steel and high-strength welds with safety in mind.
BrandTCE #ad
ManufacturerTCE #ad
Height45.5 Inches
Length3 Inches
Weight39.65 Pounds
Width8 Inches
Part NumberTCE42009
ModelTCE42009
Warrantylimited 2-year manufacturer warranty

6. Goplus

#ad

Goplus 2 Ton High Reach Tripod Jack Under Hoist Stand

#ad
Goplus #ad - Easy to operateit has quick adjust spin handle with thrust bearing for stabilize and safe hoist works. Multi-applicationideal for supporting exhaust systems, shock absorbers and other vehicle components during under vehicle repair.

2 ton bearing-capacitythis hoist tripod stand jack is made of heavy duty no. 235 steel, which has 2 ton bearing capacity and long-term durability. Height adjustableits hoist height can be adjusted from 49'' to 84'' to meet different requires. Four screws in every corner for changing pad easily. Rubber padthere is a rubber pad on the top to prevent scratching vehicles.
BrandGoplus #ad
ManufacturerSuperbuy #ad
Height84 Inches
Length24 Inches
Weight34.2 Pounds
Width24 Inches
Part NumberSU-4768-TA

7. Camco

#ad

Position And Level Your RV, Trailer Or Camper, Camco Olympian Aluminum Stack Jacks, Can Support Up to 6,000 lb., Stabilize, Extends 11", 17", 4 Pack 44560

#ad
Camco #ad - Includes: comes with a set of 4 stack jacks. Durable construction: Made of cast aluminum. Adjustable: extends from 11" - 17". Superior strength: Each jack supports up to 6000 lb. Stabilizes and levels your RV: Designed to get secure and level RV positioning and stability.
BrandCamco #ad
ManufacturerCamco #ad
Height11 Inches
Length6.14 Inches
Weight6.63 Pounds
Width6.14 Inches
Part Number44560
Model44560
Warranty1 year against manufacturing defects

8. Sunex Tools

#ad

Pair, Jack Stands, Sunex 1410 10-Ton, Pin Type, High Height

#ad
Sunex Tools #ad - Large saddle with locating lugs support. Four leg steel base. Made of heavy schedule pipe for added strength and stability. Quick and easy height adjustment. Base length:38. 27 inch. V shaped saddle to cradle axles or other under truck components.
BrandSunex Tools #ad
ManufacturerSunex International #ad
Height17.7 Inches
Length39 Inches
Weight105 Pounds
Width17.7 Inches
Part Number1410
Model1410

9. EAZ LIFT

#ad

48855, Camco Eaz-Lift King Pin Tripod 5th Wheel Stabilizer, Adjustable from 39-Inches to 53-Inches

#ad
EAZ LIFT #ad - Provides stability: Adds stability to the front of your 5th wheel. Compatibility: Designed for use with a 5th wheel trailer. Adjustable: from 39-inches to 53-inches. Load capacity: certified 5000 lb. Load capacity. Easy-to-use: move foot pads inward or outward for major adjustments; use screw lever for minor adjustments with the provided stabilizing adjusting lever.
BrandEAZ LIFT #ad
ManufacturerEaz-Lift #ad
Height7 Inches
Length49 Inches
Weight27 Pounds
Width7 Inches
Part Number48855
Model48855
Warranty1 year manufacturer