Top 9 Nylon Fuel Line Fittings – Automotive Replacement Fuel System Fittings

As an Amazon Associate I earn from qualifying purchases.

1. Dorman

#ad

Dorman 800-082 Fuel Line Fitting

#ad
Dorman #ad - Dorman’s quick disconnect label offers a complete selection of connectors, clips and line repairs for fuel lines, oil and transmission lines and heating/cooling systems. Fitting attachment end 1: Quick Disconnect ; Fitting Attachment End 2: Barb. Fuel line quick connector that adapts 3/8 In. Steel to 3/8 In. Gasket material: Viton; Material: Plastic. Dorman fuel line connectors, Retainers & Repair Kit 800-082. Nylon Tubing.
BrandDorman #ad
ManufacturerDorman - OE Solutions #ad
Height1.25 Inches
Length4.87 Inches
Weight0.02 Pounds
Width1.87 Inches
Part Number800082
Model800-082
WarrantyLIMITED WARRANTY

2. EVIL ENERGY

#ad

EVIL ENERGY 6AN Fuel line Hose Fitting Kit Braided Nylon Stainless Steel Oil Gas CPE 20FT Black Hose ID: 0.34inch

#ad
EVIL ENERGY #ad - Bursting pressurepsi: 2000psi. Hose id: 11/32". The 6an nylon braided fuel line kit includes: 10pcs 6an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree, 2pcs 6an hose separator clamp and 6an braided fuel line Length: 20 Feet.

Commonly used as transmission oil cooler line, race gas, fuel return line, pump gas, oil, coolant fluid hose, turbo cooler line, carburetor fuel hose, hydraulic fluid, fuel supply line, oil feed line, vacuum, coolant, ls swap fuel line. Please make sure the pressure and temperature range is suitable for your application before purchase. Working temperature range: -40℉ to 257℉-40℃ to 125℃. Hose od: 0543inch. Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion.

Professional installation is highly recommended. Black braided steel fuel hose maximum working pressure psi: 500 psi. Warranty: evil energy offers 3-month warranty for the braided fuel line. Nylon and stainless steel braided cpe fuel hose can be used with transmission fluid, diesel and fuel. Outer nylon braided has excellent inflaming and safer to use. Please measure before purchase!
BrandEVIL ENERGY #ad
ManufacturerSpeedwow Tuning #ad
Height3.54 Inches
Length8.66 Inches
Width7.87 Inches
Part NumberFBA-KT01269AN6BK-HW

3. Dorman

#ad

Dorman 800-080 Fuel Line Quick Connector That Adapts 5/16 in. Steel to 5/16 in. Nylon Tubing, 2 Pack

#ad
Dorman #ad - Excellent value - original equipment quality at a lower price. Saves money - replace only the part, not the entire assembly. Backed by team of engineers and quality control specialists in the United States. Quality construction - manufactured from premium materials for a long service life. Direct replacement - these fuel line connectors fit and function like the vehicle's original equipment connectors for reliable, leak-free performance.
BrandDorman #ad
ManufacturerDorman - OE Solutions #ad
Height1.2 Inches
Length4.8 Inches
Weight0.04 Pounds
Width1.8 Inches
Part Number800080
Model800-080
WarrantyLimited Lifetime Warranty

4. Dorman

#ad

104 Piece, Dorman 800-300 Nylon Fuel Line Repair Kit

#ad
Dorman #ad - Backed by team of engineers and quality control specialists in the United States. Cost-effective replacement - saves time and money by replacing only the damaged section. Organized tech tray - keep your shop or garage efficient by keeping everything in one place. Easy replacement - all components may be easily re-ordered using the matching visual reference guide on the inside cover of the case. Quick and easy - allows for easy on-the-vehicle repairs. No more difficult manipulation of entire fuel lines.
BrandDorman #ad
ManufacturerDorman - OE Solutions #ad
Height4.75 Inches
Length13 Inches
Weight8.83 Pounds
Width16.7 Inches
Part Number800300
Model800-300
WarrantyLimited Lifetime Warranty

5. The Stop Shop

#ad

The Stop Shop Nylon or Steel Fuel Line Replacement Kit. Fittings / Tubing / Compression Fittings. 25' 10 mm Fuel line tubing

#ad
The Stop Shop #ad - This kit is not made specifically for any year, make or model. Kit to replace 3/8" steel fuel line or 10 mm Nylon Fuel Line. Compression fittings for 3/8" steel tube to replace with 10 mm Nylon.

Adapters to fit GM male fuel applications. Includes: 25 feet of 10 mm o. D. Steel fuel linenote: the non serrated side of this union is for nylon hose, 2 x 90 degree female connectors to connect to 3/8" O. D. Nylon fuel line, 2 x 10mm hose ends to 3/8" quick disconnect ends, 2 x 10mm hose ends to 16mm gm fittings with 'o' ring flare, 2 x straight female quick disconnect fittings to attach to 3/8" O. D. Steel fuel line, 2 x compression unions to connect the 10 mm nylon tube to 3/8" O. D. Rather it is a kit that has the most common pieces we have found needed for fuel line repairs. Fuel line, 2 x unions for 10 mm Nylon Line.
BrandThe Stop Shop #ad
ManufacturerThe Stop Shop #ad
Part NumberNFK1025F
ModelNFK1025F

6. Dorman

#ad

3/8 in. Nylon to Steel, 5 Pack, Dorman 800-223 Fuel Line Compression Union

#ad
Dorman #ad - Also suitable for a broad range of industrial and commercial uses. Backed by team of engineers and quality control specialists in the United States. Available in many different styles, including elbows, union, and tees. Conveniently packaged in diverse piece counts to assist with both small and large projects. A large variety of tube diameters and pipe sizes available.
BrandDorman #ad
ManufacturerDorman - OE Solutions #ad
Height1.5 Inches
Length3.19 Inches
Weight0.4 Pounds
Width2.38 Inches
Part Number800-223
Model800-223
WarrantyLimited Lifetime Warranty

7. beler

#ad

Beler Male 11.8MM SAE & Female 3/8" 10MM Nylon Straight Elbow Quick Release Connector for Fuel Line Hose

#ad
beler #ad - Made of quality material compatible with fuel/gas, durable to use. With a large flow, durability, and other common fluid types, corrosion resistance characteristics. Can be separated from the middle, connect and disconnect. Easy to install, the barbed ends connect to fuel lines or hoses, save time and manpower. Allows you to quickly connect the fuel lines by pushing-in and disconnect by simply pulling out while pressing the lock buttons.
Brandbeler #ad
Manufacturerhermeshine #ad
Part NumberSHEZ149P1

8. Ameetaa

#ad

20 Ft 6AN 3/8" Universal Premium Braided Oil Fuel Line Hose CPE Oil Gas Stainless Steel Nylon Filler Feed Hose W/ 10PCS AN6 Hose End Fitting Adapter Kit Red andBlue

#ad
Ameetaa #ad - Materialfuel line: double stainless steel braided + CPE Synthetic Rubber; Fitting: T7 Aluminum Alloy & Nylon. Working pressure: 1500 PSI. Working temperature: -100℉ to 500℉ -73°C to + 260°C.

It is maintenance free and precision engineered to increase life. Legal disclaimer: this part is not legal for sale in the states of CA and NY. Fuel hosesize: an 6; length: 20ft. Kindly notice no instruction included. We recommend a professional installation, and the performance is still excellent after a long period of extreme environmental testing.

Anodized Finish for strength and durability. Package included1 * 20ft fuel hose; 4 * an-6 straight swivel hose ends; 2 * an-6 45°swivel hose Ends; 2 * AN-6 90°Swivel Hose Ends; 2 * AN-6 180°Swivel Hose Ends. Safety featuresthe product has good flame retardancy and excellent corrosion resistance. Inner core CPE has excellent corrosion resistance.
BrandAmeetaa #ad
ManufacturerAmeetaa #ad
Weight2.98 Pounds
Part NumberAMT-6AN-014

9. EVIL ENERGY

#ad

EVIL ENERGY 10AN 5/8" PTFE E85 Hose Braided Fuel Injection Line Fitting Kit 16FT Nylon Stainless Steel Black

#ad
EVIL ENERGY #ad - The an10 nylon and stainless steel braided ptfe fuel injection line kit includes: 10pcs 10an ptfe hose end fittings 4pcs straight, 2pcs 45 degree, 2pcs 90 degree, 2pcs 180 degree and AN10 PTFE braided fuel line Length: 16feet.

Maximum working pressure psi: 2000 psi. Professional installation is highly recommended. An-10 nylon and stainless steel braided high pressure PTFE fuel line kit holds up a lot stronger to heat and extreme circumstances. Bursting pressure psi: 6000psi. Outside Diameter: 068inch. Ptfe lined hose can be compatible with all automotive fuels, lubricants, and coolant. Working temperature range: -76℉ to 446℉ -60℃ to 230℃. Please measure before purchase! Braided fuel hose Inner Diameter: 1/2".

Black braided ptfe fuel line can be used as fuel injection hose, vapor return line, carb fuel line, turbo oil feed and boost line, ls engine swap fuel line, transmission oil cooler line, EFI fuel line, fuel return line, vacuum line, fuel supply line and other high temperature high pressure applications. Ptfe hose relatively hard, it can't be bend and folding in half.
BrandEVIL ENERGY #ad
ManufacturerSpeedwow Tuning #ad
Weight4.63 Pounds
Part NumberKT00468BB