As an Amazon Associate I earn from qualifying purchases.
Alltrade #ad - 4pc axle nut socket set K. Built to exceed tool standards. Tool set for removal and installation of harmonic balancers that have threaded holes.
Adapters included: m12-1. 5, 1/2-inch-20, m16-2. 0, m14-1. 5, 7/16-inch-20, 9/16-inch-18 and 3/416. Kit 12 includes 22-piece for removal and installation of harmonic balancers with threaded holes.
ABN #ad - Practical: use the abn universal harmonic balancer puller & installer 52-Piece Tool Kit – Master Balancer & Pulley Removal/Installation Set to safely remove harmonic balancers and drive pulleys which are pressed fitted onto the crank shaft without damaging your vehicle.
Contents: package includes 1 puller shaft + 1 flanged nut + 1 puller plate bearing + 8 adapters + 11 washers + 10 black screw bolts + 20 silver screw bolts + 1 carrying case. Versatile: also works on gear pulleys and steering wheels; bearing-centered circular 2/3-way and an assortment of metric and fractional bolts and adapters provide wide coverage; Fits L98 & LT series engines, GM LS1 with aftermarket 3-bolt style balancer; If your balancer has threaded drilled and tapped holes in the front to attach supplied pulling bolts to, it is compatible.
Easy storage: heavy-duty 13” x 9. 5” x 2. 5” 33cm x 24. 1cm x 6. 4cm plastic blow-molded carrying case for easy transportation, simple storage, and quick organization; Each slot has an embossed size labeling for easy identification. Specifications: heavy duty 3/4" diameter forcing screw internally threaded to fit the eight adapters to install harmonic balancers; adapters m16 x 2. 0, m12 x 1. 5, 3/4-16, 9/16-18, unc 3/8” x 4-1/2”, unf 1/4" x 2-1/2”, m8 x 1.
Powerbuilt #ad - Combo 2/3 jaw gear pull 4. Kit 45 includes 33-piece for removal and installation of harmonic balancers with threaded holes.
Strong and dependable enough to last a lifetime. Kit services: many domestic V8 and V6 engines with harmonic balancers with threaded holes. Storage case includes usage photos. Tool set for removal and installation of harmonic balancers that have threaded holes.
Aain #ad - Fits a variety of chrysler, SUVs, pickups, Mitsubishi, vans, GM, Cadillac, etc. Portable and easy to store. High quality plastic storage box. 3-jaw puller with four lengths of forcing rods, one forcing screw with a 3/8-inch square drive for use with a ratchet, one 3/4-inch hex for wrench or socket use.
3mirrors #ad - The harmonic balancer puller comes with a thrust bearing, instead of the flat washer, also higher hex end makes the installation easier, tool threads into the crankshaft and pushes the crankshaft pulley into position.
If the recent shipment may have caused a small amount of product to bend, 4, please contact the Seller in time to get a new FREE replacement directly.
Package includes: 1 threaded stud, 1 thrust bearing & 1 flange nut All parts are upgraded, you will see, 1 washer, Excellent Value. Thank you for your understanding! ls / lt harmonic balancer Install Tool Compatible with all GM LS & LT series engines 1997-current Gen 3, & 5.
OEMTOOLS #ad - Harmonic balancer removal tool: our harmonic balancer puller kit removes harmonic balancers without tapped holes; Harmonic balancer puller set is compatible with balancers in many GM, Jeep, Chrysler, and Dodge vehicles.
Gm applications: 5. 3 l, 6. 2 ls3, 6. 0 ls2, 5. 7 ls1, and 7. 0 l. Chrysler, and dodge applications: 3. 5 l v6, 6. 1 l, 4. 7 l v8, 3. 6 l v6, 5. 7 l v8, jeep, and V8. Convenient design: the harmonic pulley puller features a clip-in design, allowing harmonic balancer removal without bolting the crank puller to the balancer; No need to remove the radiator with this harmonic damper pulley puller.
3mirrors #ad - Good quality and worked perfect, Much safer than pulling on the balancer with a bolt. Upgraded bolt strength is 12. 9, and one end has a hex head smaller than the bolt diameter, 16*45*4mm, which is easy to install and remove.
109 steel upgraded manufacturing craft, the screws and the stud rod are smooth connection and not easy to get stuck, Add Lubricating oil will be more perfect when used! Package: Package: 1 bolt with HEX END, 1 HEIGHTEN nut, 2 THICK washers.
The 2 small washers are: 16*40*5mm, they are pretty strong. The nut is a custom heightened nut, which is twice the normal nut. New Upgraded! Thank you for your understanding! LS / LT Harmonic Balancer Install Tool. Compatible with all gm ls & lt series engines 1997-current Gen 3, 4, & 5. Easy job, tool threads into crankshaft and pushes the crankshaft pulley into position.
OEMTOOLS #ad - Instructions and storage case included: Our harmonic balancer pulley removal tool comes with easy-to-follow instructions and a durable blow-molded carrying case; Easily take this harmonic balancer puller set from job to job.
For pressed-on harmonic balancers: harmonic balancer tool is designed for pressed-on harmonic balancers with a single center retainer bolt; Uses 3 jaw puller arms with significant bite to grip and remove spoke-style pressed-on harmonic balancers.
Wide application: crankshaft harmonic balancer puller designed for use with model gm 2000 Generation II Cadillac 1988 - Newer, Chrysler 1990, Chevrolet Trucks 2003 - Newer, Ford 1995 - Newer, and Mitsubishi Eclipse 1995. Product specifications: includes puller body, 3-jaw puller, 5-13/32", 3 jaw retaining Pins, 4 pressure Screw Adapter Rods 4", 6-1/2", 3 Wave Washers, and 7-13/32"; Blow-Molded Carrying Case.
1. Alltrade
#ad648637, Silver, Alltrade Powerbuilt Harmonic Balancer Puller and Installer Set
#adAdapters included: m12-1. 5, 1/2-inch-20, m16-2. 0, m14-1. 5, 7/16-inch-20, 9/16-inch-18 and 3/416. Kit 12 includes 22-piece for removal and installation of harmonic balancers with threaded holes.
More information #ad
Tool solutions for most all situations. Strong and dependable enough to last a lifetime. Removal pieces: combo yoke, national fine center screw, center point piece and bolt pairs. Installation pieces: national fine center screw, thrust bearing, forcing nut and jaw nut. Kit services: many automobiles and light trucks.| Brand | Alltrade #ad |
| Manufacturer | Alltrade Tools #ad |
| Height | 10.25 Inches |
| Length | 2.88 Inches |
| Weight | 7.15 Pounds |
| Width | 13 Inches |
| Part Number | 648637 |
| Model | 648637 |
More information #ad
2. ABN
#adABN Universal Harmonic Balancer Puller & Installer 52-Piece Tool Kit – Master Balancer & Pulley Removal/Installation Set
#adContents: package includes 1 puller shaft + 1 flanged nut + 1 puller plate bearing + 8 adapters + 11 washers + 10 black screw bolts + 20 silver screw bolts + 1 carrying case. Versatile: also works on gear pulleys and steering wheels; bearing-centered circular 2/3-way and an assortment of metric and fractional bolts and adapters provide wide coverage; Fits L98 & LT series engines, GM LS1 with aftermarket 3-bolt style balancer; If your balancer has threaded drilled and tapped holes in the front to attach supplied pulling bolts to, it is compatible.
More information #ad
Easy storage: heavy-duty 13” x 9. 5” x 2. 5” 33cm x 24. 1cm x 6. 4cm plastic blow-molded carrying case for easy transportation, simple storage, and quick organization; Each slot has an embossed size labeling for easy identification. Specifications: heavy duty 3/4" diameter forcing screw internally threaded to fit the eight adapters to install harmonic balancers; adapters m16 x 2. 0, m12 x 1. 5, 3/4-16, 9/16-18, unc 3/8” x 4-1/2”, unf 1/4" x 2-1/2”, m8 x 1.
| Brand | ABN #ad |
| Manufacturer | ABN #ad |
| Height | 2.25 Inches |
| Length | 13 Inches |
| Weight | 8.51 Pounds |
| Width | 10 Inches |
| Part Number | 6595 |
| Model | 4333088824 |
More information #ad
3. Powerbuilt
#adPowerbuilt 33 Piece Harmonic Balance Puller and Pulley Installer Kit, 648616 , Black
#adStrong and dependable enough to last a lifetime. Kit services: many domestic V8 and V6 engines with harmonic balancers with threaded holes. Storage case includes usage photos. Tool set for removal and installation of harmonic balancers that have threaded holes.
More information #ad
Tool solutions for most all situations. Built to exceed tool standards. For use on many uS made V6 and V8 engines. Includes special puller for removal of the crankshaft pulley on many 1990 and newer Chryslers engines.| Brand | Powerbuilt #ad |
| Manufacturer | Alltrade Tools #ad |
| Height | 13.63 Inches |
| Length | 3.25 Inches |
| Weight | 10.3 Pounds |
| Width | 15.88 Inches |
| Part Number | 648616 |
| Model | 648616 |
| Warranty | Limited Factory Warranty |
More information #ad
4. Aain
#adAain Harmonic Balancer Puller Kit, 5 Piece Removal Tool Set, Professional Automotive Mechanic Tool Set Harmonic Balancer Puller Installer Kit for Removing Harmonic Balancers and Dampers
#adMore information #ad
Shock absorber pulley in the sealed engine compartment is designed to be removed without removing the radiator. When positioning the harmonic balancer disassembly tool, the spring gripper holds the bracket in place, making disassembly and reinstallation simple and inexpensive.| Brand | Aain #ad |
| Manufacturer | Aain #ad |
| Part Number | MK29 |
| Model | MK29 |
More information #ad
5. kauplus
#adKauplus Harmonic Balancer Pulley Installer Pulley Puller & Installer Set
#adkauplus #ad - 13 special adapters in the right reach lengths to fit most threaded crankshafts. The heavy-duty 7/8" diameter forcing screw has internal threads to fit the threaded adapters. Come in with blow case. Threaded adapter size each of: 7/16-20, m14 x 1.More information #ad
5, m14 x 2. 0, 5/8-18, 9/16-18, m12 x 1.75, m12 x 1. 0, m10 x 1. 5, 3/4-16, m12 x 1. 5, m16 x 1. 5, 1/2-20, m16 x 2. 0 Idea for installs drive pulleys or harmonic balancers that are press-fitted onto the crankshaft, available on almost every car and light truck application.| Brand | kauplus #ad |
| Manufacturer | Kaupa #ad |
| Part Number | AMZ PC9199 |
More information #ad
6. 3mirrors
#adCrankshaft Installation Crank Pulley Installer w/Thrust Bearing 551141 for V8 Engine, 3mirrors Enhanced Version Harmonic Balancer Puller Crank Compatible with GM 1997-Up LS1 / LS Engines
#adIf the recent shipment may have caused a small amount of product to bend, 4, please contact the Seller in time to get a new FREE replacement directly.
More information #ad
109 steel upgraded manufacturing craft, the screws and the stud rod are smooth connection and not easy to get stuck, Add Lubricating oil will be more perfect when used! Good quality and worked perfectly, Much safer than pulling on the balancer with a bolt. Package includes: 1 threaded stud, 1 thrust bearing & 1 flange nut All parts are upgraded, you will see, 1 washer, Excellent Value. Thank you for your understanding! ls / lt harmonic balancer Install Tool Compatible with all GM LS & LT series engines 1997-current Gen 3, & 5.
| Brand | 3mirrors #ad |
| Manufacturer | 3mirrors #ad |
| Weight | 0.76 Pounds |
| Part Number | T003GM03 |
More information #ad
7. OEMTOOLS
#adDodge, Quickly Removes Harmonic Balancers Without Tapped Holes, Jeep, No Need to Remove the Radiator, OEMTOOLS 25264 GM Harmonic Balancer Puller, Chrysler
#adGm applications: 5. 3 l, 6. 2 ls3, 6. 0 ls2, 5. 7 ls1, and 7. 0 l. Chrysler, and dodge applications: 3. 5 l v6, 6. 1 l, 4. 7 l v8, 3. 6 l v6, 5. 7 l v8, jeep, and V8. Convenient design: the harmonic pulley puller features a clip-in design, allowing harmonic balancer removal without bolting the crank puller to the balancer; No need to remove the radiator with this harmonic damper pulley puller.
More information #ad
Quick and easy: this oem pulley puller saves you time by safely and quickly removing balancers, making a difficult job much easier; Time-saving pulley puller kit gets the job done faster than a less expensive harmonic balancer tool.| Brand | OEMTOOLS #ad |
| Manufacturer | OEMTOOLS #ad |
| Height | 1 Inches |
| Length | 1 Inches |
| Width | 1 Inches |
| Part Number | 25264 |
| Model | 25264 |
More information #ad
8. 3mirrors
#ad3mirrors Upgraded Harmonic Balancer Puller 551141 Crank Install Tool Compatible with GM 1997-Up LS1 / LS Engines Crank Pulley Installer
#ad109 steel upgraded manufacturing craft, the screws and the stud rod are smooth connection and not easy to get stuck, Add Lubricating oil will be more perfect when used! Package: Package: 1 bolt with HEX END, 1 HEIGHTEN nut, 2 THICK washers.
More information #ad
Any product problems caused by the transportation process, please contact the seller in time to get a new replacement for free. It will be easier to twist with a wrench, and the wrench will not easily fall off. The 2 small washers are: 16*40*5mm, they are pretty strong. The nut is a custom heightened nut, which is twice the normal nut. New Upgraded! Thank you for your understanding! LS / LT Harmonic Balancer Install Tool. Compatible with all gm ls & lt series engines 1997-current Gen 3, 4, & 5. Easy job, tool threads into crankshaft and pushes the crankshaft pulley into position.
| Brand | 3mirrors #ad |
| Manufacturer | 3mirrors #ad |
| Weight | 0.78 Pounds |
| Part Number | T003GM03 |
More information #ad
9. OEMTOOLS
#adIncludes 4 Forcing Rods, OEMTOOLS 25090 Harmonic Balancer Puller Kit, Adjustable 3-Jaw Puller Fits Most Late Model Vehicles, Forcing Screw Fits a 3/8” Square Drive
#adFor pressed-on harmonic balancers: harmonic balancer tool is designed for pressed-on harmonic balancers with a single center retainer bolt; Uses 3 jaw puller arms with significant bite to grip and remove spoke-style pressed-on harmonic balancers.
More information #ad
Easy to use: unique spring-loaded jaws hold the legs in place when positioning the harmonic balancer removal tool, making removing and reinstalling the harmonic balancer a relatively simple and inexpensive process. Wide application: crankshaft harmonic balancer puller designed for use with model gm 2000 Generation II Cadillac 1988 - Newer, Chrysler 1990, Chevrolet Trucks 2003 - Newer, Ford 1995 - Newer, and Mitsubishi Eclipse 1995. Product specifications: includes puller body, 3-jaw puller, 5-13/32", 3 jaw retaining Pins, 4 pressure Screw Adapter Rods 4", 6-1/2", 3 Wave Washers, and 7-13/32"; Blow-Molded Carrying Case.
| Brand | OEMTOOLS #ad |
| Manufacturer | OEMTOOLS #ad |
| Height | 2 Inches |
| Length | 9.3 Inches |
| Weight | 3.4 Pounds |
| Width | 7.2 Inches |
| Part Number | 25090 |
| Model | 25090 |
| Warranty | OEMTOOLS Limited Lifetime |
More information #ad
