As an Amazon Associate I earn from qualifying purchases.
JDMSPEED #ad - Bolt pattern: 5 on 4. 5", bearing races and 1/2"-20 studs installed. Set of 2 new trailer idler hub kits 5 on 4. 5 for 2, 000 lbs trailer axle, for 1-1/16" straight spindle. Easy lube; replacement For Most 2, 000 lb Hubs.
TK Trailer Parts #ad - Any trailer setup, any average size - we offer it! No need to guess or search for all the repair parts that fit your trailer, we have them packaged for you. Oem grade trailer Axles & Suspension. All the parts you will need for your trailer in one convenient kit.
The ROP Shop #ad - Specs - 1, used on 2, 250 lb hub capacity, 000 lb axle shaft 1 diameter: 1 1/4" shaft 2 diameter: 1" shaft length: 8 3/4" 4" Long Stub Hub A Diameter.2 1/2" hub b diameter: 5 1/2" Bolt Pattern: 4". Rated to 1, 250 lbs.
Each or 2, 000 lbs. Includes - 4 idler hub with lug nuts, 4 1" bt8 round spindle with castle nut, Pin & Washer, 8 inner/outer bearings, 4 Double-lip Grease Seal 1 1/4" I. D. For the pair. Assembly with 4 on 4" bolt idler hub & 1" round bt8 spindle.
2" o. D. 4 2" grease/dust cap; comes as shown in the first image. Replacement pack of 4 trailer axle Kits with Hardware, Rated 1250 lb each for 2000 lb axle. This hub fits standard length spindles, not "short spindles". Refer to images 2 & 3 for more information.
TK Trailer Parts #ad - Internal wiring system To ensure seamless design Protect brake wires from wear and tear. Capacity: 2000 lbs. High strength straight steel Axle Tube Construction to ensure Even Tire Wear A better highway experience.
The ROP Shop #ad - Replacement pack of 4 trailer axle kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle. Rated to 1, 250 lbs. Includes - 4 idler hub with lug nuts, pin & washer, 4 1" bt8 round spindle with castle nut, 8 inner/outer bearings, 4 Double-lip Grease Seal 1 1/4" I.
D. Refer to images 2 & 3 for more information. Specs - 1, 250 lb hub capacity, used on 2, 000 lb axle shaft 1 diameter: 1 1/4" shaft 2 diameter: 1" shaft length: 8 3/4" 4" Long Stub Hub A Diameter.2
Each or 2, 000 lbs. 2" o. D. 4 2" grease/dust cap; comes as shown in the first image. Fits 2, 000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle.
SOUTHWEST WHEEL #ad - Hub includes inner and outer bearing L44643, grease cap, seal, and lug nuts. Spindle includes spindle nut, spindle washer, and cotter pin. 1 1/4" diameter, 3 3/8" long shaft, BT8 1" spindle. Per spindle, two will hold 2, 000 lbs. Rated at 1000 lbs. 4-4" bt8 hub pre raced and studded.
ANPART #ad - Axles, works on dexter and other brands 2000lbs axle in the market. High-performance seal: has good heat r-esistance, mud and sewage r-esistance, so it is suitable for a variety of complex and harsh environments.
Spray paint protection layer: our trailer hub are uniformly surface-painted, which can greatly reduce or avoid oxidative c-orrosion on the wheel surface, and can maintain a beautiful appearance for a long time.
1. LIBRA
#adLIBRA Set of 2 Trailer Idler Hub Kits 5 on 4.5 for 1-1/16" Straight Spindle 2000lbs Axles- 22016K
#adLIBRA #ad - Pls noted, this hub fit straight spindles, not for tapered spindles. Kits also includ: 4x l44649 outer cone bearings, 2x Grease seals, 2x E Z lube grease caps with rubber plug; 10 cone wheel nuts 1/2"-20 thread.More information #ad
Set of 2 new trailer idler hub kits 5 on 4. 5 for 2, 000 lbs trailer axle, for 1-1/16" straight spindle. Bolt pattern: 5 on 4. 5", bearing races and 1/2"-20 studs installed.| Brand | LIBRA #ad |
| Manufacturer | Libra #ad |
| Height | 14 Inches |
| Length | 7 Inches |
| Width | 7 Inches |
| Part Number | 22016 |
More information #ad
2. JDMSPEED
#adJDMSPEED 2 Trailer Idler Hub Kits 5 on 4.5" Replacement for Axle 1-1/16" Bearings 2000 lbs, 22016K
#adMore information #ad
Kits also include: 4x l44649 outer cone bearings, 2x grease seals 1-1/16", 2x E Z lube grease caps with rubber plug; 10 cone wheel nuts 1/2"-20 thread. Note: this hub fit straight spindles, not for tapered spindles.| Brand | JDMSPEED #ad |
| Manufacturer | JDMSPEED #ad |
| Weight | 13.23 Pounds |
| Part Number | 22016K |
More information #ad
3. TK Trailer Parts
#adTK | 71/58 5" 0 | 5x4.5, 2000 lb TK Single Axle Kit, 2K Capacity Axle Series
#adMore information #ad
| Brand | TK Trailer Parts #ad |
| Manufacturer | The Trailer Parts Outlet #ad |
| Part Number | 02SALDKTTK7158545 |
More information #ad
4. The ROP Shop
#adRated 1250 lb Each for 2000 lb axle, The ROP Shop Pack of 4 Trailer Axle Kits with Hardware
#adEach or 2, 000 lbs. Includes - 4 idler hub with lug nuts, 4 1" bt8 round spindle with castle nut, Pin & Washer, 8 inner/outer bearings, 4 Double-lip Grease Seal 1 1/4" I. D. For the pair. Assembly with 4 on 4" bolt idler hub & 1" round bt8 spindle.
More information #ad
Fits 2, 000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. 2" o. D. 4 2" grease/dust cap; comes as shown in the first image. Replacement pack of 4 trailer axle Kits with Hardware, Rated 1250 lb each for 2000 lb axle. This hub fits standard length spindles, not "short spindles". Refer to images 2 & 3 for more information.
| Brand | The ROP Shop #ad |
| Manufacturer | The ROP Shop #ad |
| Part Number | 1002000004_3 |
More information #ad
5. TK Trailer Parts
#ad2000 Pound Axles, Trailer Double Eye Spring Suspension and Single Axle Hanger Kit for 1 3/4" Tube
#adTK Trailer Parts #ad - 4 4-1/4" long u-bolts; 2 u-bolt tie plates for 1-3/4" Spring; 8 3/8" Hex Nuts. 2 1-1/2" tall front hangers; 2 7/8" tall rear hangers. 2 3 leaf 25 1/4" x 2" trailer double Eye Spring for 2000 lb Axles. 6 9/16" diameter lock nuts. 4 3-1/8" long shackle straps; 6 3" long x 9/16" diameter shackle bolts.More information #ad
| Brand | TK Trailer Parts #ad |
| Manufacturer | TK Trailer Parts #ad |
| Part Number | 2ksushangkit |
More information #ad
6. TK Trailer Parts
#ad2000 lb Idler 4 Lug, TK | 61/46 4'0 | 4x4 | 1 U-Bolt Kit-4 U-Bolts, 8 Lugs, 2 Tie Plates, 2k TK Trailer Axle
#adMore information #ad
Underslung - axle is welded with spring seats on the bottom Allows for lower ride height For optimal usage, use with double eye springs.| Brand | TK Trailer Parts #ad |
| Manufacturer | The Trailer Parts Outlet #ad |
| Part Number | 02IDTK6146440UB |
More information #ad
7. The ROP Shop
#adThe ROP Shop Pack of 4 Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle
#adD. Refer to images 2 & 3 for more information. Specs - 1, 250 lb hub capacity, used on 2, 000 lb axle shaft 1 diameter: 1 1/4" shaft 2 diameter: 1" shaft length: 8 3/4" 4" Long Stub Hub A Diameter.2
More information #ad
2 1/2" hub b diameter: 5 1/2" Bolt Pattern: 4". For the pair. This hub fits standard length spindles, not "short spindles". Assembly with 4 on 4" bolt idler hub & 1" round bt8 spindle. Each or 2, 000 lbs. 2" o. D. 4 2" grease/dust cap; comes as shown in the first image. Fits 2, 000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle.
| Brand | The ROP Shop #ad |
| Manufacturer | The ROP Shop #ad |
| Part Number | 1002000004_1 |
More information #ad
8. SOUTHWEST WHEEL
#adSOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 4-4" Bolt Circle Hub
#adMore information #ad
| Brand | SOUTHWEST WHEEL #ad |
| Manufacturer | SOUTHWEST WHEEL #ad |
| Part Number | BT8BT121E |
More information #ad
9. ANPART
#adANPART Trailer Hub Kit for 2000 lbs axle 1 1/16, 4 to 4 Bolt Idler Hub & 1 Round BT8 Spindle Trailer Axle Hub Wheel Bearing Kits, L44649 Spindle
#adSpray paint protection layer: our trailer hub are uniformly surface-painted, which can greatly reduce or avoid oxidative c-orrosion on the wheel surface, and can maintain a beautiful appearance for a long time.
More information #ad
Compatibility : fits 2000 lb. Before you buy: please make sure the hub assembly matches your model. There are no installation instructions for this product, you can search for installation videos directly on YouTube. High load capacity and Accuracy: Has super load capacity and provides precise guidance for wheel rotation.| Brand | ANPART #ad |
| Manufacturer | ANPART #ad |
| Height | 4.33 Inches |
| Length | 12.2 Inches |
| Weight | 9.19 Pounds |
| Width | 6.69 Inches |
| Part Number | 162313-5260-1425375343 |
| Model | Adjustable |
More information #ad
30-90% Disocunts Found!
We found that some of the products on this list are now discounted on Amazon! Do you want to see these products?
Disclaimer: We earn small fee from purchases made on Amazon.
