As an Amazon Associate I earn from qualifying purchases.
WORKPRO #ad - Tips: bent angle design for easier use; Little oil for rust protection. Soft, nonslip red grips offer extra reach and leverage in tight places. High carbon steel for strength and reliability; Permalock fastener eliminates nut and bolt failure.
A ABIGAIL #ad - Application the oil filter wrench can be adjust to remover the filters from 2-1/2 inch to 4. 5 inch filters. Fits 1/2 and 3/8 inch square drive ratchet or 7/8 inch wrench in all kinds of vehicles. With the shinning painting on the surface, the filter wrench is totally rust and corrosion resistant.
These three jaws will catch the filter more tightly. Then you need a oil filter to make your work easy.
Service100% satisfaction guarantee, parts, simply contact customer service for troubleshooting help, If you have any issues with the oil filter wrench, replacement, or refund. Special design the oil filter wrench is specially designed with three jaws. Sometimes the filters are very tough. High quality the oil filter wrench is made of 45# carbon steel.
TEKTON #ad - Long handles reach into tight spaces. Three-position slip joint design quickly adjusts to size. Total length: 11. 5 in. Width: 3.
No more floppy filter wrenches. Handle swivels more than 180° with adjustable tension. Patent: 8, 573, 094. Tough, stainless steel band with permanently bonded textured coating for superior gripping power.
Special design -- fit oil filters found behind crank sensor without crushing it, our oil filter wrenches are perfectly sized with added contact area to allow for easy installation and a fit that won't slip.
KiWAV #ad - Perfect fit-- for all harley-davidson twin Cam Big Twin models and other models with oil filters with 14 flutes. Unique feature-- the filter wrench has a large cut out in order to clear the crank position sensor area.
Usage-- easy of use for installation and removal of oil filter Allows the spin-on filter to be turned with a 3/8" drive socket wrench.
K&N #ad - Protect your engine: Synthetic-blend filtration media removes most harmful contaminants. Heavy-duty construction: Heavy-duty canister for outstanding durability. Easy to remove: Fast and easy Wrench-Off removal. High flow rates: designed to provide exceptional flow rates and a consistent flow of oil to your engine.
Motivx Tools #ad - The jaws will grip the stuck filter tightly and begin loosening it. Important notes - the tool is for oil filter removal only, not for installation. The jaws are built tough using nickel plated 4130 chromoly steel and attached to the 3/8” thick solid steel top plate.
For larger spin-on filter sizes greater than 3. 5" use the motivx Tools MX2331. Low profile design gives you access to tight access spots. Easy to use – simply slide the jaws of the wrench over the filter while slightly rotating to the right tighten.
Once the wrench is seated in place on the filter, use a ratchet and 3/8" extension to begin ratcheting the wrench counter-clockwise loosen. These oil filter wrenches are backed by a limited lifetime warranty and excellent customer service. Not for use on chrome plated oil filters or cartridge style filters where you have to remove a plastic or metal cap to expose the filter element. Securely grip and remove a wide range of filters – the motivx tools mx2330 oil filter wrench removes small 2. 5” - 3.
1. WORKPRO
#adConduit, WORKPRO 12" Adjustable Oil Filter Pliers, Ideal For Engine Filters, & Fittings, Oil Filter Wrench Adjustable Oil Filter Removal Tool, W114083A
#adMore information #ad
Accommodates most common size car and small engine filters. Fits filters from 2-3/8 to 4-1/2 inches 60 to 102 millimeters in diameter.| Brand | WORKPRO #ad |
| Manufacturer | WORKPRO #ad |
| Height | 1.57 Inches |
| Length | 12 Inches |
| Weight | 1.03 Pounds |
| Width | 3.54 Inches |
| Part Number | W114083A |
| Model | W114083A |
More information #ad
2. A ABIGAIL
#adAdjustable 3 Jaw Oil Filter Wrench Tool Best for Removing Motorcycles Cars Trucks & Heavy Duty Oil Filters Fits Diameters 2 1/8-4 1/2 Inches Fits ⅜ and ½ inch Drive
#adThese three jaws will catch the filter more tightly. Then you need a oil filter to make your work easy.
More information #ad
This kind of material is much stronger than the normal materials. Our aim is to make you satisfy the parts and the service we provide for you. Functionthe oil filter wrench is a universal tool to remove the filters on your vehicles. Service100% satisfaction guarantee, parts, simply contact customer service for troubleshooting help, If you have any issues with the oil filter wrench, replacement, or refund. Special design the oil filter wrench is specially designed with three jaws. Sometimes the filters are very tough. High quality the oil filter wrench is made of 45# carbon steel.
| Brand | A ABIGAIL #ad |
| Manufacturer | A ABIGAIL #ad |
| Part Number | A7715F |
More information #ad
3. TEKTON
#adTEKTON 12 Inch Oil Filter Pliers | 5866
#adMore information #ad
1 in. Height: 08 in. Right-angle teeth grip while turning in either direction. Fits oil filters from 2-1/4 in. In diameter. To 4-1/2 in. Soft, comfortable grips offer nonslip control.| Brand | TEKTON #ad |
| Manufacturer | TEKTON #ad |
| Height | 1 Inches |
| Length | 16.69 Inches |
| Weight | 1.07 Pounds |
| Width | 5.82 Inches |
| Part Number | 5866 |
| Model | 5866 |
| Warranty | Always Guaranteed: [email protected] |
More information #ad
4. Lisle
#adLisle 57020 Small Oil Filter Swivel Wrench
#adLisle #ad - Swivel handle makes it easy to turn in tight spots. Specially designed tab keeps grip from sliding off the handle. Tension adjusting nut allows swivel pressure to be regulated.No more floppy filter wrenches. Handle swivels more than 180° with adjustable tension. Patent: 8, 573, 094. Tough, stainless steel band with permanently bonded textured coating for superior gripping power.
More information #ad
Won't slip. Coating process adds many additional gripping points to securely grab the filter. Fits a common smaller filter size found on many domestic and foreign vehicles. 2. 875 - 3. 25 73 - 82. 5mm range.| Brand | Lisle #ad |
| Manufacturer | Lisle #ad |
| Height | 7.87 Inches |
| Length | 39.76 Inches |
| Weight | 0.7 Pounds |
| Width | 15.75 Inches |
| Part Number | 57020 |
| Model | 57020 |
More information #ad
5. Kiwi Master
#adKIWI MASTER Oil Filter Cap Wrench Tool for 1984-2021 Harley Spin-on Oil Filters Except '15-later XG Twin Cam Oil Filters with 76 x 14 Flutes Crank Sensor
#adKiwi Master #ad - Application -- for use with 1984-2021 harley spin-on oil filters except '15-later XG. Lifetime warranty -- lifetime warranty, support return for undamaged, built to last, excellent quality, full non-defective products within 30 days after receipt of goods, satisfaction guaranteed.Special design -- fit oil filters found behind crank sensor without crushing it, our oil filter wrenches are perfectly sized with added contact area to allow for easy installation and a fit that won't slip.
More information #ad
Quality -- our oil filter cap wrench is made from premium quality forged metal to last long, the surface is treated with sand blasted non-slip finish to prevent corrosion, do not rust. Usage -- easy of use for installation and removal of oil filter;Allows the spin-on filter to be turned with a 3/8" drive socket wrench.| Brand | Kiwi Master #ad |
| Manufacturer | KIWI MASTER #ad |
| Height | 1.5 Inches |
| Length | 3.2 Inches |
| Width | 3.2 Inches |
| Part Number | VPCW1003U |
More information #ad
6. BikeMaster
#adBikeMaster Oil Filter Wrench 65mm
#adBikeMaster #ad - Not just for professional riders and mechanics, but for the everyday rider / mechanic as well. At bikemaster, they understand the quality and performance that motorcycle owners demand. That is why bikemaster continues to bring that level of quality and performance to all riders with their complete line of tools, parts and accessories at affordable prices.More information #ad
These wrenches make even hard-to-reach filters easy to change65mm:Fram PH6017A. Hond. They also understand that quality should be affordable. 15410-mm5-013. Kawasaki O. E.| Brand | BikeMaster #ad |
| Manufacturer | BikeMaster #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 0.2 Pounds |
| Width | 0 Inches |
| Part Number | 151752 |
| Model | 151752 |
More information #ad
7. KiWAV
#adOil Filter Cap Wrench compatible for Harley-Davidson Twin Cam 76 mm 14 Flutes Crank Sensor, By KiWAV
#adUsage-- easy of use for installation and removal of oil filter Allows the spin-on filter to be turned with a 3/8" drive socket wrench.
More information #ad
Long lifetime-- made from high strength forged steel for firm and durable, without the problems of broken in half, stripped the filter housing etc. Durable-- 4. 6mm thickness metal around the square hole. Hint: put a rag or sandpaper inside the wrench will help to grab filer tightly. Nomore cracked when you try to twist it hard.| Brand | KiWAV #ad |
| Manufacturer | KiWAV #ad |
| Weight | 0.31 Pounds |
| Part Number | KR-K404-oilfiltertool-HD |
| Model | 13 |
More information #ad
8. K&N
#adPremium, KN-138, Fitment, black, Designed to be used with Synthetic or Conventional Oils: Fits Select Suzuki Motorcycles, K&N Motorcycle Oil Filter: High Performance
#adMore information #ad
Fit type: Vehicle Specific. Versatile compatibility: Designed to operate with all synthetic, conventional, and blended motor oils. Extensively tested: Laboratory tested to ensure excellent capacity and burst strength. No-hassle warranty: 1-Year Limited Warranty.| Brand | K&N #ad |
| Manufacturer | K&N Engineering #ad |
| Height | 3.2 Inches |
| Length | 2.9 Inches |
| Weight | 0.55 Pounds |
| Width | 2.9 Inches |
| Part Number | KN-138 |
| Model | KN-138 |
| Warranty | limited |
More information #ad
9. APSG
#adOIL FILTER WRENCH Motorcycle Fit: Filters > WIX WL1000, 51358 / HONDA GEN. 15410-MFJD01, 15410-MM5013 Specifically made to fit only these three filters !
#adAPSG #ad - Only fits this filter >>>>>>*honda genuine filter. Only fits this filter>>>>>*wix wl1000 filter. 15410-mfj-D01. Perfect fit for the listed filters ****************** fitments ***********only fits filters: *.More information #ad
15410-mm5-013. Designed to fit selected motorcycle oil filters:. Wix 51358 Filter. Only fits this filter>>>>>>>> *honda genuine filter.| Brand | APSG #ad |
| Manufacturer | WRENCH TEC / Z-TOOL #ad |
| Part Number | OIL WRENCH CAP #6514 |
More information #ad
10. Motivx Tools
#adMotivx Tools Oil Filter Removal Tool, 3.25" Small Diameter Spin-On Oil Filters, Adjustable Wrench for 2.5"
#adFor larger spin-on filter sizes greater than 3. 5" use the motivx Tools MX2331. Low profile design gives you access to tight access spots. Easy to use – simply slide the jaws of the wrench over the filter while slightly rotating to the right tighten.
More information #ad
Heavy duty construction – this removal tool features a. 050” captured spring as opposed to the flimsy. 020” spring found on other wrenches. The wrench features a tooth style design for a secure grip that won't slip and lets you easily and safely remove the filter. Once the wrench is seated in place on the filter, use a ratchet and 3/8" extension to begin ratcheting the wrench counter-clockwise loosen. These oil filter wrenches are backed by a limited lifetime warranty and excellent customer service. Not for use on chrome plated oil filters or cartridge style filters where you have to remove a plastic or metal cap to expose the filter element. Securely grip and remove a wide range of filters – the motivx tools mx2330 oil filter wrench removes small 2. 5” - 3.
| Brand | Motivx Tools #ad |
| Manufacturer | Motivx Tools #ad |
| Height | 2 Inches |
| Length | 2.9 Inches |
| Weight | 0.83 Pounds |
| Width | 2.5 Inches |
| Part Number | MX2330 |
| Model | MX2330 |
More information #ad
