As an Amazon Associate I earn from qualifying purchases.
1. gohantee #ad
Gohantee 15 Fin Igniter Replacement for Harman Pellet Stoves 3-20-677200 #adgohantee #ad
- Compatible with all Harman models listed. If your ohms reading is within 10%, more or less than the rating 46Ω +/- 10%. If it fails on your stove, feel free to contact us any time. Replace part numbers manufacture part number: 3-20-677200 replaces part numbers: 1-10-06620, 3-20-06783.
Start your stove and visually look for the orange glow; 2. Troubleshooting igniters 1.
Gain access to the igniter and remove it from the stove or insert. Was formally a 15 Fin. Fitment this 306 watt igniter is compatible with all automatic ignition harman stoves. Technical specs watts: 306, width: 3/8" rod with 1" fins, length: 3.
25", connectors: Male Spades. Service gurantee package include: 1pc x 306 watt Igniter. 3. Use a dmm digital Multi-Meter. Physically feel around in the burn pot after the stove has been on for a few minutes to “feel” for heat being generated. P35i, pf100, p68, p43, p61a, advance, xxv, 52i, accentra, PB105.
2. YAOAWE #ad
3-20-06783, 1-10-06620., 306W Ignitor Hod Rod Replacement Part Models 3-20-677200, YAOAWE Pellet Stove Igniter Parts Replacement for Harman Stoves #adYAOAWE #ad
- Troubleshooting for harman pellet stove igniter- if your stove blows a fuse when you try to start the stove but does not blow a fuse when the igniter parts is switched to "manual", there is going to be an exposed igniter wire touching the metal of the burn pot or the ignition rod itself is shorted out to the cradle mount.
Perfect replacement kit for your old harman stove parts igniter - compatible with harman models: absolute 43, xxv, p68-c, accentra cast free standing, p35i-c, 52i tc, p61-c, p35i, p68, pb105 pre: 008341121, 52i, Advance, absolute 63, Accentra, Allure 50, pf100 pre: 008350087, P43, P61, P61A, P43-C, Accentra Insert, Absolute 43-C, furnace & Boiler Systems, XXV TC.
Helpful tips: this 306 watt ignitor is compatible with all automatic ignition Harman except those which use a pressurized ignition system. Have warmth this winter! - 306w 120v pellet stove igniter made from durable materials and guaranteed to provide a perfect fit.
Replacement part models: 3-20-677200, 3-20-06783, 1-10-06620 The metal part of the ignitor is 3. 1" and the wire lead is 8", male spades connectors are easy to install, which can help you to keep infusing family with warmthin this season! After-sales service for pellet stove igniter parts - If you encounter any problems during the installation and use, please do not hesitate to contact us. We have a professional after-sales team that will provide you with the most effective solution within 24 hours.
|Part Number||3-20-677200, 3-20-06783, 1-10-06620|
3. Adviace #ad
3-21-33647 3-21-22647, Replacement Convection Distribution Blower for Harman P68 P43 P61 P38 P61A PC45 PP38 & Advance & Accentra 52i & Absolute 63 Pellet Stoves, Harman DVC-500 DVC500 Coal Stove #adAdviace #ad
- Replacement distribution blower for harman clarity 929dv & 929 DV, DVC500, Clarity 929 B-Vent, BVG and DVG Models Gas Stoves. Technical specifications: 1500 RPM, 60Hz. Distribution blower blows air through the exhaust plenum and through the openings on the front of the stove to provide the heat to your room.
Included with purchaseour aftermarket harman pellet stove distribution blower is complete assembly, includes convection blower motor with housing, three wire leads with 1/4" female insulated terminals, 0.74 amps, 115 volts, 1 year warranty.
Ultra quiet engineeringthe aftermarket harman p68 distribution blower features a Ultra Quiet motor designed by FASCO, also very quiet while moving a lot of air, which is very smooth and low vibration, you won’t know your stove is on.
Compatibilityreplacement distribution blower 3-21-33647 for harman accentra 52i, absolute 63, pc45, p61-c, p61a, accentra52i, accentra52i-tc, pc-45, P38 Plus, P68, P38, allure 50, P61, invincible t, accentra 52i-tc, absolute 63, PP38+, Advance, P43-C, P68-C, p43, invincible rs, P38+, Pellet Pro II Pellet Stoves. Replacement distribution / convection blower, part number 3-21-22647 & 3-21-33647. Compatibilityreplacement distribution blower 3-21-22647 for harman dvc-500, 44 magnum 44 mag, mark i wood & coal stoves.
4. Criditpid #ad
Criditpid Replacement 3-20-60906 Auger Feeder Gear Motor for Harman P43, P38 Pellet Stoves, AMP-CW4., 4 RPM Clockwise Auger Motor, P68, Accentra 52i, P61, P35i #adCriditpid #ad
- Compatibility replacement 3-20-60906 auger motor for harman pellet stove accentra 52i, p35i, p43, invincible T, Accentra 52i TC, pellet Pro II, p35i-c, p38+, Accentra Insert, Invincible RS, Invincible Insert, P43-C, pc45, PF100, PF120 Models.
Wire length: 20" with ¼" Male and Female Terminal. 1 year warranty. Amp-cw4 auger Motor. High-quality & easy to installthe harman 4rpm auger motor is easy to install with 20 inch wire, we provide both male and female spade connectors, depending on your stoves configuration.
The cw4 auger motor is made of quality stainless steel, durable material that can be applied for a long time. Compatibility 4 rpm clockwise auger motor for harman wood & coal stove DVC-500, Quiet, Super Magnum Stoker.
The 3-20-60906 auger motor technical specifications volts: 120v ac, cycles: 60 hz, rpm: 4. 0, amps: 072 a, direction: Clockwise. Compatibility replacement 3-20-60906 auger motor for harman pellet stove p38 post: 008080066, p61-c post: 008085803, P61A Post: 008085803, P61 Post: 008085055, P68 Pre: 008280309. High quality auger MotorPowerful, Energy Efficient and Long Lasting.
5. Adviace #ad
P61, P38+, P38, Invincible RS/Insert, PF100, HF60 Pellet Stoves, DVC 500, Advance, PB105, XXV, P61A, Accentra 52i, 3-20-502221, P43, Adviace 5" Double Paddle Exhaust Fan Blade Impeller for Harman P68 #adAdviace #ad
- Technical specs diameter: 5", aperture: 5/16", high: 1", type: double paddle fan blade. Noteharman uses 3 different sized impellers to fine-tune how much air is moved through the stove.
Replacement for part Number: 3-20-502221. Perfect compatible models3-20-502221 double paddle fan blade replacement for Heatilator Eco Choice BA100, BH105, BH601 year warranty. Please check out the compatible stoves tab to verify which impeller you need for your stove.
This 3-20-502221 exhaust blower fan blade is a 5" double-sided impeller. Perfect compatible models3-20-502221 double paddle fan blade replacement for Harman Coal Stove DVC-500, 44 Magnum, Mark I.
Perfect compatible models3-20-502221 double paddle exhaust fan blade impeller replacement for harman pellet stove xxv, p38, advance, P61, Furnace & Boiler Systems, P61A, HF60, P43-C, P68-C, P61-C, Invincible Insert, PB105, Accentra 52i, p38+, P43, PF100, p68, Invincible RS.
6. Criditpid #ad
XXV, P61, P43, P38+ Pellet Stoves, Criditpid Replacement 3-20-502221 Double Paddle Exhaust Fan Blade for Harman P68, Accentra 52i., 5" Double-sided Motor Blade for Harman Advance, P38 #adCriditpid #ad
- Compatibility replacement 3-20-502221 double paddle Fan Blade for Heatilator Eco Choice BA100, BH105, BH60 Compatibility replacement 3-20-502221 double paddle Fan Blade for Harman Coal Stove DVC-500, 44 Magnum, Mark I.
Check out the compatible stoves tab to verify which impeller you need for your stove. 1 year warranty. Compatibility replacement 3-20-502221 double paddle fan blade for harman pellet stove xxv, hf60, p43, furnace & boiler Systems, p38+, P43-C, P68-C, p61-c, PF100, p61, P38, p68, advance, P61A, PB105, invincible Insert, Accentra 52i, Invincible RS.
This harman 5" combustion blower fan blade is a double-sided impeller that is used on most freestanding Harman Pellet Stoves. The listed models are just for reference, please double measure the size of your original parts and compare with ours before ordering.
7. HHT #ad
Replacement Harman Convection/Distribution Blower Accentra, and P35i Pellet Stove- 3-21-29045! by HHT, XXV, SALE #adHHT #ad
- 90 day manufacture Warranty. Includes blower, Wires, Ends and Instructions for Installation. Fits harman pellet models: ~ accentra cast Freestanding ~ P35I ~ XXV ~ XXV-TC. Part # 1-00-29145 / 3-21-29045. Aftermarket Harman Convection Blower - Premium.
8. Pellethead #ad
Harman Heatilator Black ESP Thermistor Probe 3-20-11744 #adPellethead #ad
- Exhaust thermistor probe, esp, black wire. You must order the same color thermistor probe as the one you are replacing. One year Warranty. Replaces part #s 3-20-00744 | 1-00-00744 | 3-20-11744.
Fits harman pellet stoves: ~ accentra cast fs pre serial # 00840167 ~ accentra insert pre serial # 008241201 ~ advance pre serial # 008360001 ~ invincible insert ~ invincible rs ~ p38 pellet pro plus p38 + ~ p61 all models, including those that have a red and white wire ESP ~ P61A Pre Serial # 008085803 ~ P68 Pre Serial # 008280309 ~ PC45 Pre Serial # 008055031 ~ PF100 Black Wires ~ XXV Pre Serial # 008206292.
Fits harman coal stoves: ~ dvc 500 pre serial # 008065076 ~ 44 magnum Fits Heatilator Eco-Choice Pellet Stoves: ~ BA100 Black Wires. There are 2 different thermistor ESP probes for the Harman line; one has a black wire, one has a red wire.
9. SZRKRLA #ad
Pellet Stove Igniter Parts Fit for All Harman Pellet Stoves Automatic Ignition 306W Ignitor Hod Rod Replacement #3-20-677200 3-20-06783 1-10-06620 15Fin #adSZRKRLA #ad
- High quality material: the pellet stove igniter made of high quality durable material, high temperature resistance, corrosion resistance, easy to install. Replacement part numbers: 3-20-677200, 3-20-06783, 1-10-06620 Compatible: the pellet stove igniter is fits for self-ignition Harman stoves except those using a pressurized ignition system.
Specifications: wattage: 306, width: 3/8" rod With 1" Fins, Length: 3. 25", connector: Male Spades. Package include: 1Pc x 306 Watt Igniter.
10. Harman #ad
1-10-08550W, for The XXV, Harman 3 1/2" Sprocket Hub, Accentra & Advance #adHarman #ad
- If you have a harman pellet stove with a 2-1/2" sprocket that needs to be Replaced, You Will Need To Use The 3-1/2" Version And Replace The Chain To The Longer One.
The 2-1/2" sprocket is now a 3-1/2" And The Chain Is Longer. Extremely Durable. The chain used for that version is shorter than the next Version. This is part of the old style chain and sprocket feed System For The Following Harman Pellet Stoves: XXV, Accentra Free Standing & Advance.
You'll need to order the Upgrade Kit 1-00-06626. When harman first distributed their stoves with the chain/sprocket feed system, they had one 2-1/2" sprocket and one 3-1/2" sprocket. Small hub sprocket setups will not accommodate the newer 3 1/2" Sprocket.