As an Amazon Associate I earn from qualifying purchases.
novonest #ad - Wide range of usesallows users to extend and connect addressable RGB LED strips or fans, etc. Product informationeach splitter cable is equipped with 4 male pins. Compatible with asus, msi, gigabyte and ASROCK Addressable RGB motherboards.
And through the 3-pin ARGB connector of a single motherboard to meet various needs. Quality materialsusing soft pVC material, the cable is firmly sleeved and wrapped to provide long-lasting performance and avoid dust and breakage.
airgoo #ad - Please check the picture carefully to see if your argb fans have the same connector. Each adapter cable length: 60cm/23. 6in, enough long for easy installation and keep tidy. This adapter cable is compatible with any 5v 3-pin connector 5v, data, n/a, gnd argb fans.
This adapter cable is for corsair lighting node core and corsair commander core xt 4-pin connector, DATA, to make any 5V 3-Pin Connector 5V, N/A, GND ARGB Fans easily connected to Corsair RGB Fan Controller and controlled by Corsair ICUE software.
Connect to corsair lighting Controller and controlled by Corsair ICUE software, create amzing lighting effects and save money. Notice: corsair controller is not included!!!!! notice: corsair controller have port current limit, please carefully read the CORSAIR Controller instructions, please don't connect too many fans to the port!!!!! Quality warranty: one-year warranty.
LUORNG #ad - When connected to the motherboard,. Support asus/msi/asrock +5v3-pin argb light control, support +5V 3Pin digital RGB interface, not compatible with 12V4 PIN RGE interface.
Support wind chaser/mg slide light products, slide CPU cooler, slide strip, Magic Ring, mg slide fan, it supports Wind Chaser chassis, compatible with Wind Chaser 5V 3Pin phantom products. The motherboard controls the 5v 3-pin slide light adapter cable, and through the motherboard control, the motherboard can be synchronized to achieve more light modes.
airgoo #ad - This adapter cable is compatible with airgoo argb led strips, N/A, DATA, gnd and controlled by motherboard sync software, please check the picture carefully to see airgoo supported led strips model.
Any questions for our airgoo product both before and after you place the order, contact us anytime, we will reply you within 24 hours. Connect to 5v 3-pin argb header +5V, create amzing lighting effects and save money.
Quality warranty: one-year warranty. This adapter cable is for asus aura sync, n/a, gigabyte rgb fusion motherboards with 5v 3-pin argb Header +5V, data, to make any 5v 3-pin sm connector +5v, DATA, msi mystic light sync, gnd, GND ARGB devices easily connected to 5V 3-pin ARGB Header and controlled by motherboard sync software.
OPSFALCON #ad - Package: 2pcs of argb 1 to 2 sm 3 pin male splitter cable 5V 3-pin 11. 8 inches, 2pcs of 3 Pin Connectors. Addressable rgb - argb splitter extension cable compatible with 5050/3528 addressable RGB LED strip lights or ARGB fans.
Argb splitter cable compatible with asus, mSI, GIGABYTE and ASROCK addressable RGB motherboards.
LICHIFIT #ad - Cable length: 50cm. It can convert your gigabyte motherboard 5V 3Pin VDG to normal 3Pin. Voltage: 5V. Wiring: the arrow logO corresponding to RGB Pin 5V. Supplied with a male 3Pin socket.
MICRO CONNECTORS #ad - Country of Origin : China. Lengths range from 30 To 50Cm. Flexible pvc material For Easy Routing In Tight Spaces. Males pins Included For Convenience.
Generic #ad - Specifically, it depends on the interface on the motherboard and the number of pins of the device interface you are using. Five sets of fan jacks on the left and right for easy installation, creating a neat and tidy computer space.
With 52cM motherboard cable. Support for asus, for asrock motherboards 5v/3pin d-rgb light control interface to be controlled by the motherboard, for gigabyte, for MSI, and the lights can be synchronized with other D-RGB products.
Standard 5v 3-pin interface, universal standard 5V 3-pin ARGB interface, compatible with various brands of motherboards, no need to worry about compatibility issues. The paste is stable, double-sided adhesive is fixed, and the foam pad on the back can also play the role of insulation protection. 1. 3. 4.
Phanteks #ad - 360 radiator support in the front, 240 radiator support in the top. Storage support with 3x dedicated SSD locations and a 3. 5” hdd location. Easily accessible front i/o featuring a usb 3.
ZCZQC #ad - The package includes: 1pc 5V 3-pin one-to-two ARGB extension cable. Portable size: 33. 5cm/13. 19inch in length. Simple and practical: multi-interface, smooth link, help solve the problem of insufficient ARGB interface.
1. novonest
#adNovonest 5V 3Pin Addressable RGB 1 to 4 Splitter Cable,Y-Shaped Fan and Pc Led Strip Extension Cable,LED Strip and ARGB Fan Connector,Equipped with 4 Male pins,53ARGB1-Pack
#adAnd through the 3-pin ARGB connector of a single motherboard to meet various needs. Quality materialsusing soft pVC material, the cable is firmly sleeved and wrapped to provide long-lasting performance and avoid dust and breakage.
More information #ad
Support the 1 to 4 argb splitter cable not supports 12V RGB only support 5V RGB and the adapter cable supports 3 pin addressable RGB LED sync. Special designthe ergonomic design of the extension cord provides you with greater flexibility and is very convenient to use. Easy to plug, perfect for Larger Enclosures and no need to buy other motherboards, which saves money and space.| Brand | novonest #ad |
| Manufacturer | novonest #ad |
| Part Number | 53ARGB |
| Model | 53ARGB |
More information #ad
2. airgoo
#adConvert to 5V 3-Pin ARGB Connector 5V,Data,N/A,GND, airgoo 4pin Adapter Cable for Corsair Lighting Node CORE Corsair Commander Core XT, Connect to Any 5V 3-Pin ARGB Case Fans
#adThis adapter cable is for corsair lighting node core and corsair commander core xt 4-pin connector, DATA, to make any 5V 3-Pin Connector 5V, N/A, GND ARGB Fans easily connected to Corsair RGB Fan Controller and controlled by Corsair ICUE software.
More information #ad
Any questions for our airgoo product both before and after you place the order, contact us anytime, we will reply you within 24 hours. Connect to corsair lighting Controller and controlled by Corsair ICUE software, create amzing lighting effects and save money. Notice: corsair controller is not included!!!!! notice: corsair controller have port current limit, please carefully read the CORSAIR Controller instructions, please don't connect too many fans to the port!!!!! Quality warranty: one-year warranty.
| Brand | airgoo #ad |
| Manufacturer | airgoo #ad |
| Part Number | AG-DB-4P-01 |
| Model | AG-DB-4P-01 |
More information #ad
3. LUORNG
#adSplitter Cable, LUORNG Adapter Cable for 5V 3-pin ASUS Aura SYNC 20Inch MSI Mystic Light Gigabyte RGB Fusion Connect to Any 3-Pin SM Connector +5V,Data,GND ARGB Lightings for Airgoo LED Strips
#adSupport wind chaser/mg slide light products, slide CPU cooler, slide strip, Magic Ring, mg slide fan, it supports Wind Chaser chassis, compatible with Wind Chaser 5V 3Pin phantom products. The motherboard controls the 5v 3-pin slide light adapter cable, and through the motherboard control, the motherboard can be synchronized to achieve more light modes.
More information #ad
Connection method: you can first connect the slide lamp products in series and then connect to the 5V 3Pin motherboard adapter cable, and then connect to the motherboard, which can connect multiple slide lamp products in series. Package contents: 1pc motherboard controls 5V 3-pin slide adapter, cable length: 50 cm/20 inches.| Brand | LUORNG #ad |
| Manufacturer | LUORNG #ad |
| Part Number | 40917-ACGFC-1 |
More information #ad
4. airgoo
#adAirgoo 5V 3Pin ARGB Adapter Cable, for Motherboards 5V 3Pin ARGB Header+5V,Data,N/A,GND, Make it Easy Connect to Any 3Pin SM Connector +5V,Data,GND ARGB Lightings
#adAny questions for our airgoo product both before and after you place the order, contact us anytime, we will reply you within 24 hours. Connect to 5v 3-pin argb header +5V, create amzing lighting effects and save money.
More information #ad
Each adapter cable length: 50cm/20in, enough long for easy installation and keep tidy. Make sure your rgb devices have 5v 3-pin sm Connector +5V, GND, DATA, please check the picture carefully. Quality warranty: one-year warranty. This adapter cable is for asus aura sync, n/a, gigabyte rgb fusion motherboards with 5v 3-pin argb Header +5V, data, to make any 5v 3-pin sm connector +5v, DATA, msi mystic light sync, gnd, GND ARGB devices easily connected to 5V 3-pin ARGB Header and controlled by motherboard sync software.
| Brand | airgoo #ad |
| Manufacturer | airgoo #ad |
| Part Number | AG-1T2-3PC |
| Model | AG-1T2-3PC |
More information #ad
5. OPSFALCON
#ad1 to Dual ARGB Cable, 2 Pack 1 to 2 ARGB Spliter Cable Male, 5V 3 Pin Addressable RGB Splitter Cable with SM 3 Pin Male Connector for Computer Chassis, 11.8 Inches, OPSFALCON ARGB Splitter Cable
#adArgb splitter cable compatible with asus, mSI, GIGABYTE and ASROCK addressable RGB motherboards.
More information #ad
Material: genuine new copper cores, no recycled materials. Note: only supports 3 pin 5v addressable rgb motherboard header, does not support 4 pin 12V RGB header. Function: argb splitter cable allows to extend and connect its addressable argb led or argb fan through a single motherboard +5V 3 pin ARGB header.| Brand | OPSFALCON #ad |
| Manufacturer | OPSFALCON #ad |
| Height | 0.28 Inches |
| Length | 11.8 Inches |
| Width | 0.59 Inches |
| Part Number | OP-ARGBSplitterCable-Female |
| Model | OP-ARGBSplitterCable-Female |
More information #ad
6. LICHIFIT
#adLICHIFIT 5V 3PIN RGB VDG Conversion Line Cable Connector for GIGABYTE Motherboard
#adMore information #ad
| Brand | LICHIFIT #ad |
| Manufacturer | leagoods #ad |
More information #ad
7. MICRO CONNECTORS
#ad30cm with Male Pins, MICRO CONNECTORS 3-Pin Addressable RGB ARGB 1 to 4 Splitter Cable
#adMore information #ad
| Brand | MICRO CONNECTORS #ad |
| Manufacturer | Micro Connectors, Inc. #ad |
| Height | 0.4 Inches |
| Length | 7.5 Inches |
| Width | 4.5 Inches |
| Part Number | F04-04ARGB-30 |
| Model | F04-04ARGB-30 |
| Warranty | Lifetime |
More information #ad
8. Generic
#ad5V 3 pin ARGB RGBW Cable Splitter Hub for ASUS Aura SYNC RGB 10 Hub Splitter SATA LED Strip Light PC RGB Fan Cooler Power Extension Cable Adapter
#adWith 52cM motherboard cable. Support for asus, for asrock motherboards 5v/3pin d-rgb light control interface to be controlled by the motherboard, for gigabyte, for MSI, and the lights can be synchronized with other D-RGB products.
More information #ad
Comes with adhesive, the installation is very convenient, easy to install. 5. You can purchase it accordingly. Widely compatible. You cannot connect a three-pin four-pin device or a four-pin hub to a three-pin lighting device. Standard 5v 3-pin interface, universal standard 5V 3-pin ARGB interface, compatible with various brands of motherboards, no need to worry about compatibility issues. The paste is stable, double-sided adhesive is fixed, and the foam pad on the back can also play the role of insulation protection. 1. 3. 4.
| Brand | Generic #ad |
| Manufacturer | awtpm #ad |
| Weight | 0.11 Pounds |
| Part Number | Cable Splitter Hub |
More information #ad
9. Phanteks
#adBlack, Phanteks PH-EC300GA_DBK02 Eclipse G300A Ultra-fine Performance Mesh, Mid-Tower case, 3X D-RGB Fan, Tempered Glass
#adMore information #ad
0 type a and type c, microphone/Headphone Combo, Power button, and Reset button.360mm gpu support with 30mm front fans combined. High airflow mesh with triple 120mm front fan support. Triple front d-rgb fans and D-RGB MB adapter included.| Brand | Phanteks #ad |
| Manufacturer | Phanteks #ad |
| Height | 18.3 Inches |
| Length | 15.7 Inches |
| Weight | 12.3 Pounds |
| Width | 7.9 Inches |
| Part Number | PH-EC300GA_DBK02 |
| Model | PH-EC300GA_DBK02 |
| Warranty | 1 year manufacturer |
More information #ad
10. ZCZQC
#adCPU Cooler and 5v ARGB Fan, ARGB Splitter Cable ZCZQC 33.5cm/13.19inch 5V 1 Female to 2 Male 3 Pin ARGB Extension Cable for Computer Chassis
#adMore information #ad
Widely used: 5V 3-pin device. High safety: each needle interface is equipped with an insulating protective cap to protect the needle from bending and deformation; prevent unused needles from contacting the iron plate of the chassis and causing short circuit burns when they are energized.| Brand | ZCZQC #ad |
| Manufacturer | ZCZQC #ad |
| Part Number | ARGBSCEC-335-1 |
| Model | ARGBSCEC-335-1 |
More information #ad
30-90% Disocunts Found!
We found that some of the products on this list are now discounted on Amazon! Do you want to see these products?
Disclaimer: We earn small fee from purchases made on Amazon.
