Renogy Rover 20 Amp 12V/24V MPPT Common Positive Solar Charge Controller Regulator Compatible with Lithium Sealed, Flooded Batteries and Bluetooth Module, Gel#adRenogy #ad - Lcd screen and multiple led indicators for displaying system operation information, customizable parameters, and error codes. Also compatible with various Deep Cycle battery options: Sealed, Flooded, Gel, and Lithium 12.
8v lfp. Aluminum heat sink allows for efficient heat dissipation. Intelligent protection built-in against reverse polarity, overload, overcharging, over-discharging, short-circuiting, and reverse current.
Positive ground controller featuring innovative mppt maximum power point tracking technology with high tracking efficiency up to 99%, maximizing the energy from solar panels to charge your system. 4-stage charging bulk, boost, Float, and Equalization and temperature compensation increase your battery life and improve your system's performance.
|Model||Rover 20 Amp 12V/24V|
EPEVER 100a mppt Solar Charge Controller, 12v/24v/36v/48v Auto Max 150V 7500W Input Power fit for Sealed/Gel/FloodedTracer10415AN#adEPEVER #ad - Rs-485 communication bus interface and Modbus communication protocol let this mppt Solar Charge Controller available meet various communication requirements in different situations.
Max input solar panel power:1875w12v;3750w24v;5625w36v;7500w48V; Max input Voltage:150V;. Support 4 battery charging: Sealed, Gel, Flooded and User. [email protected] Com.
|Manufacturer||BEIJING EPSOLAR TECHNOLOGY CO.,LTD. #ad|
EPEVER MPPT Solar Charge Controller 40A 150V PV Solar Panel Controller Negative Ground W/ MT50 Remote Meter + Temperature Sensor PC Monitoring CableTracer4215BN#adSolarEpic #ad - Max solar panel 1560w, multiple load mode allow you set the load on/off in different situation. Work with all lead acid batteries, sealed AGM GEL and Flooded Battery, User mode allows buyer setting their own charging parameters.
Rs-485 communication bus interface and standard MODBUS interface available to meet various communication requirements, Temperature Sensor and PC monitoring Cable Attached.
Negative grounding mppt solar charge controller tracer4215bn, the Advanced MPPT Control Algorithm makes this 40 Amp MPPT Controller Tracking Efficiency higher than 99. 5%. This 40 amp mppt solar panel charger works with 600w solar panel on 12v battery system and 1200w on 24V Battery.
|Warranty||We offer 2 years limited warranty|
4. Victron Energy#ad
Victron Energy SmartSolar MPPT 75-Volt 15 amp Solar Charge Controller Bluetooth#adVictron Energy #ad - You can configure the voltage at which SmartSolar disconnects a load - thereby preventing excessive drain on your batteries. The smartsolar charge controller will even recharge a severely depleted battery.
Smartsolar mppt 75-volt 15 amp: a solar charger gathers energy from your solar panels, and stores it in your batteries, fastest technology, Using the latest, SmartSolar maximises this energy-harvest. The intelligent load output function prevents damage caused by running batteries 'flat'.
By constantly monitoring the voltage and current output of your solar PV panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
|Brand||Victron Energy #ad|
|Manufacturer||Victron Energy #ad|
PowMr MPPT Charge Controller 60 amp 48V 36V 24V 12V Auto, Max 190VDC Input LCD Backlight Solar Charge for Vented Sealed Gel NiCd Lithium BatterySoftware Update VersionMPPT-60A#adPowMr #ad - Our email is [email protected] Com, contact us if you have any question. Intelligence fan-on temperature >45℃ and off < 40℃, Porous heat dissipation. And fan use bearing technologies increase life UP TO 5000hrs in normal use. Copper wires:9AWG. Hope you love it. What you getour fan-favorite 24-month warranty from powmr.
We consider that the larger diameter of the wire will be greater cost for customers, so we designed two connectors for each pos and negs on solar and batteries connectors. Blacklight lcd dispaly pv voltage/output power/battery voltage/charging current/working mode/Temperature, TROUBLESHOOTING function and LCD display and can help users not only check the whole system operating data and statuses but also quickly identify system faults and modify parameters.
Built-in dsp controller with high performance Automatic battery voltage detection 12V/24V/36V/48V, Max efficiency ≥98. 1%, make sure batteries' voltage more than 12V to boost controller and make sure battery has enough power to Self-detection when connected to the controller. Fit for usercan be set lithium, lifepo4, linicomno2/vented/flooded/Sealed/Gel/NiCd battery. User programmable for absorption voltage/Floating voltage/Low voltage disconnect. Load Timer.
6. RICH SOLAR#ad
RICH SOLAR 20 Amp 12V/24V DC Input MPPT Solar Charge Controller with LCD Display Solar Panel Regulator for Gel Sealed Flooded and Lithium Battery Nagtive Ground#adRICH SOLAR #ad - Reverse protection: Any combination of solar module and battery, without causing damage to any component. Customizable charging voltages. Conversion efficiency of 98%.
Bluetooth rs232 port allows to communicate with the BT-1 Bluetooth module, which can pair with smart phone app. 12v/24v detect 12v or 24v dc system voltages automatically. Innovative mppt technology with high tracking efficiency up to 99% and peak.
|Brand||RICH SOLAR #ad|
|Manufacturer||RICH SOLAR #ad|
Renogy 100 Watt 12 Volt Monocrystalline Solar Starter Kit with 40A Rover MPPT Charge Controller#adRenogy #ad - With a renogy 100w mono-crystalline starter kit mppt, you won't have to wonder about whether you're getting the most out of your system.
This kit includes our 40a mppt charge controller which uses maximum power point tracking technology, transferring power up to 30% more efficiently than pwm charge controllers. Mono-crystalline solar cell efficiency: 21%; MPT charge controller peak efficiency: 97%.
Max 100V Input with LCD Display for Lead-Acid Sealed Gel AGM Flooded Lithium Battery MPPT-40A, OOYCYOO MPPT Charge Controller 40 amp, 12V 24V Auto 40A Solar Panel Charge Regulator#adOOYCYOO #ad - Multi-stage charging includes constant current, overload, short-circuiting, reverse discharge, constant voltage and floating charge, and temperature compensation increase your battery life and improve your system's performance. We offer a 360 day 100% satisfactory warranty for our customers.
Contact us：[email protected] Com. If you have any question. Built-in intelligent protection against reverse polarity, under voltage and reverse current. Positive ground mppt controller - the solar panel charge controller is equipped with high tracking efficiency up to 99%, hardly wasting the energy from solar panels.
And the mppt charge controller 30/40/60 amp supports manual switch load and 5 seconds to restore the factory settings. Led shows if solar panels and battery are really connected to the controller. Lightning protection function. Convenient to check. Automatic battery voltage detection 12v/24v, Dual USB, max 96VDC SYSTEMS, Gel, Flooded Lead-acid battery. All the various real-time data shown on the same one display, it's convenient for users to check the data.
20 amp Solar Panel Charge Controller Mppt 100V PV Input Negative Grounded Solar Regulator with LCD Display for Gel Sealed Flooded Lithium Battery, EPEVER 20A MPPT Charge Controller 12V/24V Auto#adEPEVER #ad - 20a solar controller mppt support for 4 type battery charging: lead-acid sealed, AGM, Flooded, Gel, User and Lithium. It protect the battery from being over-charged by the solar modules and over-discharged by the loads.
Max input Voltage: 100V. Available to meet various communication requirements in different situations. Battery temperature compensation function to ensure the controller’s life. Quick technical Support [email protected]
Auto control system to limit the charging power & current go over the rated value. Solar rv, household system and industrial field monitoring, etc. Mppt charge controller 20a : 12v / 24v auto identifying system volt. Solar panel charge regulator with rs485 interface, it can be monitored by cellphone APPeBox required, PC Software and MT50 remote meter.
Lithium Batteries and Load Timer Setting, EPEVER 40A MPPT Solar Charge Controller 12V 24V Auto, 40 amp Negative Grounded Solar Charge Controller MPPT Max Input 100V, 520W/1040W for Lead-Acid#adEPEVER #ad - Maximizing the energy from solar panels to charge your system. Solar controller mppt support pc software, flooded and lithium. Mppt charge controller protection built-in against reverse polarity, overcharging, over-discharging, overload, short-circuiting, and reverse current.
It protect the battery from being over-charged by the solar modules and over-discharged by the loads. Die-cast aluminum design allows for efficient heat dissipation. Negative ground controller featuring advanced mPPT technology with high tracking efficiency up to 99.
40a solar charge controller charging process has been optimized for long battery life and improved system performance. It includes a 4-stage battery charging Bulk, Boost, Float, and Equalization and temperature compensation increase your battery life and improve your system's performance. Auto identifying 12V/24V DCsystem voltage. Also compatible with various Deep Cycle battery options: Sealed,. Multiple load control method, Gel, APP and MT-50 .